Manufacturing
Rotating equipment watched by vibration, not by ear — and energy measured at the machine, not only at the meter.
What we monitor
What we monitor in manufacturing
Rotating equipment
Wireless accelerometers read vibration and surface temperature on the same machine — the two signals a remaining-useful-life model needs.
Power and sub-metering
Consumption at the incomer, per line, per area or per machine, with clamp-on CTs from 75 A to 600 A and support for 4 × three-phase or 12 × single-phase circuits per meter.
Process and equipment temperature
PT100 probes from −200 °C to 600 °C, with alerts on both high and low thresholds — bus bar temperature, pump rooms, heat processes and cold storage on the same platform.
Compressed air and filtration
Differential pressure sensing across filters and dryers, with ranges from 100 Pa to 10 kPa, so a clogged element is visible as a pressure trend rather than an energy bill.
Flow and consumption
Pulse counting on water, gas and third-party meters, for volume-based control and leak detection in the services that feed the plant.
Cold storage and freezers
Extreme temperature monitoring for cold rooms and freezers, where a slow drift is the early warning.
Distance and position
Distance sensing from 4 cm to 4 m for level, position and presence on production equipment.
Why wireless works here
Why this approach fits
Add devices without shutting the line — no cable trays, no containment runs, no production window.
Battery life of 4–10+ years on the wireless devices, so instrument maintenance does not become a new discipline.
Ranges of 1–5 km in built-up industrial areas and up to 45 km in open rural sites, which covers a large plant or a remote yard.
Wired devices join the same platform through an RS485 or Modbus bridge, so existing instruments are not abandoned.
An edge controller can run the rule locally, so a response happens in the plant rather than after a round trip to the cloud.
Next step
Book a site assessment
Tell us the building type, floor area, what systems are already installed, and what you need to solve. We will come back with an assessment.
Book a site assessment